Slam Strap Instructions

1. Net should measure at least 38 inches at the center prior to strap installation for best result. This Strap works on all Anchors. Snap swivel clip to anchor. Bring metal tab end of strap over net (finger points to metal tabbed end). Pull non-metal tab end through Snap Clip slot from the other side of the net. Button Swatches should be facing inward, towards the net.

2. Finger points to the discreet Sewn Mark. This mark is 36 inches from the end of the metal tabbed end when installed.

3. Left hand holds Metal Tab to court surface and right hand pulls up on Non-Metal Tabbed end. This draws the net downward until the Sewn Mark is atop the net.

4. Once Sewn Mark is atop the net, firmly secure the Velcro Swatches to set the net height.

5. Finger points to Sewn Indication Mark. Net measures 36 inches high with Metal Tab touching the court surface and the Sewn mark atop the net.

6. Fasten Button and Buttonhole Swatches through the net. This fastening system adheres the strap to the net and insures no slippage.  Play Ball!

Continue to Net Strap page

Experts on call Monday - Sunday 10 AM EST - 7 PM EST
Call 1-866-238-6552